Was this Page Helpful?

How could this page be improved?



Responsive image


Recreation Center
285 South 400 East
435-627-4560
Fax: 435-627-4569

Lapidary Program

Learn the intricacies of silver smithing and lapidary work in this new and exciting class! Lapidary is the art of cutting, polishing, and working with stone.

All tools and supplies are included. All skill levels are welcome!

Classes Tuesday and Thursday 9 AM - 12 PM or 12 PM - 3 PM



Pricing Information

$100/ Resident; $107/ Non-Resident; $8.00 daily drop in rate

Equipment Is Provide; silver not included

 

Jewelry Making Program

Chain Making Classes- Mondays, April 22- May 20 @ Noon-3:00 pm

Learn how to make bracelets or beautiful chains for your jewelry. This class has no soldering and is for all levels. It does not require any prior jewelry making experience. We will start with how to make your jumprings in large batches safely and quickly. Then we will make a few basic chains before moving into varieties of chain mail. This is a techniques class. Students will leave with samples they made of each chain in copper. 

Beginning Jewelry Making Class- Mondays, March 4-April 15 @ Noon-3:00 pm

This is a class for the absolute beginner, or for someone who hasn’t done this in a while and would like a refresher course on soldering with silver. We will cut, shape and make a bezel to fit a stone. We will then solder that down with some embellishments. We will make a bail and polish the piece. We will finish by setting the stone. Instructor will introduce several pieces of equipment in the jewelry studio including the torch, and the safe use of them. This is a project based class and students will leave with a pendant made of silver with a cabochon stone set on it. Stone selection will be different than shown on the sample. 

Tube Setting Workshop- Thursday, March 14 @ 9am-4pm

Learn a quick and easy way to set round faceted stones. Students will solder a few pieces of tubing down on a base plate. We will then use burs to cut a seat for the stones at the correct height, and then set the stones. The class will be working with copper tubing on a brass plate, although the same techniques apply to silver. This is a techniques oriented class. Beginning Jewelry class, or knowing how to solder and set a cabochon is recommended.

Rivet Making Workshop- Tuesday, March 12 @ 9am-4pm

If you can drill a hole in it, you can connect it. Learn how to attach things without solder or glue. We will go through three types of rivets- wire, tubing, and using tiny brass screws. This is a techniques class. Students will learn riveting by putting two sheets of brass together, but the technique applies to endless materials. This is for all levels. 

 

 



Pricing Information

Rivet and Tube Setting Workshops: $40 Resident; $45/ Non-Resident per workshop

Chain Making Class: $60 Resident; $65/ Non-Resident

Beginning Jewelry Making Class: $109 Resident; $114/ Non-Resident

Equipment Is Provide for each class

 

 

 

Registration

In Person


Recreation Center
285 South 400 East
435-627-4560
Fax: 435-627-4569

Online